宝安手机CEC认证需要注意事项 欢迎致电

目前2019.07.01后生产的电脑显示器需要满足CEC的要求，之前不是强制的，现在是强制的。
1605.3(v) (4) Computer monitors. Computer monitors manufactured on or after July 1, 2019, shall comply with all of the following:
(A) The computer monitor on-mode power draw shall be less than or equal to the following equation with each of the applicable allowances applied at most once:
Eon < (Eon_max + EEP + EGame + EOLED + ECurve)
Where:
Eon is the computer monitor on-mode power draw in watts as determined under Section 1604(v)(3) of this Article,
Eon_max is the maximum on-mode power draw in watts as determined by Table V-4,
EEP is the enhanced performance display allowance in watts as determined in Table V-5,
EGame is the gaming monitor allowance in watts as determined in Table V-5,
EOLED is the OLED monitor allowance in watts as determined in Table V-5, and
ECurve is the curved monitor allowance in watts as determined in Table V-5.
(B) Consume less than or equal to 1.2 watts in computer monitor sleep mode and computer monitor off mode power combined.
(C) Be shipped with a screen luminance less than or equal to 200 cd/m2 ± 35 percent. A manufacturer may ship with additional features enabled, even if they were turned off in testing.
(D) Computer monitors with touch screen capability are allowed an additional 1 watt allowance per mode in modes where touch functionality is enabled.
EXCEPTIONS to section 1605.3(v)(4): The following computer monitors are not required to comply with section 1605.3(v)(4) of this Article but shall comply with the test procedures in section 1604(v)(3) of this Article, the certification requirements in section 1606 of this Article, and the marking requirements in section 1607 of this Article:
1. KVMs.
2. KMMs.
3. Very high performance monitors.
EXCEPTION to section 1605.3(v)(4): Medical computer monitors are not required to comply with section 1605.3(v)(4) of this Article or the test procedures in section 1604(v)(3) of this Article but shall comply with the certification requirements in section 1606 of this Article and the marking requirements in section 1607 of this Article.
CEC认证是由美国加利福尼亚州能源委员会（California Energy Commission) ）于2005 年 12 月 30 日依法实施的电器能效法规（Appliance Efficiency Regulation ）。该法规实施的目的是为了提高用电产品的效率，节约能源，减少气体排放和温室效应。
行车记录仪对于有车的朋友来说并不是很陌生，但是对于一些没车的朋友，顺检科技相信很多人都不知道这是啥东西。行车记录仪顾名思义是一个可以记录东西并且是车载用的。行车记录仪的出现可以这样说避免了某些碰瓷的情况，毕竟行车记录仪可以记录在开车或者停车时的所有情况。行车记录仪不仅帮助了车主，有时也能帮助我们的警察办案等等功能。
行车记录仪CEC
世界之大，人口众多。目前世界能源是越来越少，人们在不断寻找可替代的产品的情况下大力倡导节能减排。CEC认证做为大力倡导节能减排的产物，其所规定了很多产品需要满足CEC认证的要求，CEC认证总共有58大类产品在CEC认证规范内，恰好行车记录仪也是在CEC认证的范围内。
行车记录仪CEC
在CEC认证标准中，行车记录仪所属的类别为small battery charger systems(小型电池充电系统）。为什么会归类为这类产品呢？主要是行车记录仪在行车时是依据车行驶提供能量，当车在停止的时候它是依靠内部电池供电来维持其正常的工作，电池是需要消耗电能来帮助其不断供电的。
行车记录仪CEC
既然行车记录仪做为CEC认证强制要求需要满足的产品，那么行车记录仪的CEC认证需要怎么申请？
具体的申请步骤请见如下：
1、首先提供行车记录仪测试样品给到实验室；
2、实验室对行车记录仪样品进行测试并且判断测试数据符不符合标准要求；
3、假如数据符合要求，那么实验室便会出具行车记录仪测试报告；
4、实验室提交行车记录仪测试报告、资料到CEC网站进行CEC认证注册
如果您对CEC认证有任何疑问，欢迎关注咨询贝斯通检测检测或者在下方网站留言。TKS！
CEC是加州能效认证，之前都是自愿申请认证，但从2019年7月1日起开始强制执行。申请的话要找有资质的实验室进行测试，数据通过规定限值才能登陆CEC网站注册产品上传产品信息。
自颁布到实施，目前电器能效法规（Appliance Efficiency Regulation ）已更新到目前最新版本 CEC-400-2017-002. 那么我们常见的蓝牙耳机在不在（Appliance Efficiency Regulation ）里面的，让我们一起来看看。

CEC认证是于 2005 年 12 月 30 日美国加里福尼亚州能源委员会（California Energy Commission）依法实施的电器能效法规（ Appliance Efficiency Regulation ）。 该法规实施的目的是为了节约能源，提高用电产品的效率，减少温室效应和气体排放。